24x7 Customer Support (+91) 8696493937

Cutting Process

Every rough crystal of diamond has unique inclusions and diamond cutters try to remove these inclusions with minimum carat wastage. At the time of cutting, a cutter has to keep following 3 things in mind:

Cut - This determines the beauty of diamond

Weight Retention - This impacts the size of diamond

Removal of Inclusions

Therefore, a cutter has to do a trade-off between above-mentioned 3 points at the time of stone cutting. But quite often, cutters compromise on cut of diamond to produce large and heavy stone.


Cutting and Weight Retention of Rough Diamond

During cutting process, a properly cut diamond leads to more carat weight loss as compared to shallow or deep cut. Cutter has to cut the rough stone in such manner that stones yields maximum value.


              Rough Stone         Ideal Cut Diamond       Standard Cut Stone

                          Rough Stone                                 Ideal Cut Diamond                    Standard Cut Diamond

As you can see in the image, an octahedral rough stone can be cut into 2 round brilliant cut stones. Now, the cutter will decide to go for "Ideal Cut" if:


The rough stone falls in color grade range D to F and

Stone has very few inclusions.

So, Ideal cut is chosen for stones of high quality (color and clarity) in order to further increase the monetary value of diamond, even though there is comparatively more weight loss in this cut.

But, he may go for "Premium or Standard Cut" in order to retain carat weight if:

The stone has easily visible inclusion as hint of color.

So, Premium cut is chosen for stones which are of low quality and in which further weight loss needs to be avoided in order to maximize the value of diamond.


Techniques used to Cut and Polish Diamonds

The diamonds that you see are actually found in the form of rough crystal, which may appear quite boring at a first glance - To bring out the brilliance and sparkle from the rough stone, it requires great skill and art of the trained diamond cutter.


                                 Rough and Finished Diamond

                                                                               Rough and Finished Diamond

The process of diamond cutting is a long complicated work and this process is called Lapidary. It includes cutting, shaping, polishing, and setting of finished diamond into jewelry.

These days computerized machinery and laser technology is also used during cutting process. But technology is employed only in the cutting of some of the diamonds. Otherwise, cutting process is still done by hand. Cutting skill is passed on from one generation to another.

Now, let’s talk about the Lapidary process in detail.


Lapidary Process

                           Diamond Cutting Process

                                                              Flow Chart of Diamond Cutting Process



Planning

This is the first stage of diamond cutting process. Rough crystal is first analyzed from economics point of view. Final shape of diamond is decided so as to retain its maximum weight along with removal of inclusions. These considerations are given so that the stone gets easily sold and fetches the maximum value.


Cleaving

In this stage large rough crystal is divided into separate pieces so that all pieces can be finished as separate diamonds. Cleaving becomes important for large and valuable stone. But all diamonds do not need to be cleaved or sawed. Some rough crystals are found in good shape so those are directly passed to cutting stage.

                       

                                                                                    Diamond Cleaving

Cleaver places the rough diamond in quick drying cement. Then a groove is cut along the crystallographic planes (the hardness of diamond and its ability to cleave depends on the crystallographic direction i.e. on the strength of the bonds between atoms in a crystal) using another diamond as a cutting tool.

Then rough diamond is mounted on a holder and a steel blade is placed in the groove. Cutter then strikes the blade sharply and the diamond splits along its cleavage. Then the cleaved stone is removed from the cement.


Sawing

When the diamonds need to be cut against a cleavage plane, sawing is considered as it cannot be done by cleaving. The saw is a thin blade of phosphor bronze that rotates on a horizontal spindle. As the saw blade rotates, it continues to recharge itself with diamond dust from the crystal being cut. Due to this it takes several hours to cut even a 1 carat rough diamond.



Diamond Sawing

It has to be noted that either of Cleaving or Sawing is done on a rough stone, which depends on the way the stone has to be cute.


Bruiting

In this stage, diamond to be bruited is spun on a rotating lathe, and another diamond in the lathe is rubbed against it. This leads to rounding of rough diamond into a conical shape by grinding away the pointed edges. Therefore, this process is also called "Rounding". Since this process creates the rough finished girdle, so it also called "Girdling".

                                                            Diamond Bruiting

                                                                                Diamond Bruiting


Polishing

Polishing is the final stage of the cutting process when facets are cut on the diamond and final polishing is done.


In this stage, blocking is the first step. In a round diamond, the "blocker" polishes 18 facets (table, bezel, culet and pavilion main facets). It’s done on electric motor driven revolving cast iron polishing disc. The disc is charged with diamond powder. The diamond to be polished is held by a clamp and facets are polished one by one.

Diamond Polishing

Diamond Polishing

Facets must be cut to an exact measurements and angles to maintain symmetry and yield maximum brilliance. In case of very small diamonds, polishing process stops here but larger diamonds proceed to Brillianteering stage.


Brillianteering

Cutter cuts and polishes large diamonds for another 40 facets (star, upper girdle and lower girdle facets) to create round brilliant cut with 58 facets. So, it is this faceting that gives life to the stone by enhancing its brilliance and fire.


Approval

After faceting is complete, diamond is inspected and approved and then it is boiled in hydrochloric and sulfuric acids to remove dust and oil.


Finally, the cutting and polishing process is complete and diamond is ready to be set in jewelry to start its new and life-long journey

Buy diamonds by diamond manufacturer also available diamond rough for sale.

Size to Carat Weight     Diamond facets     

© 2012 Jewel Fields. All rights reserved. www.jewelfields.com
Powered by NBN Minds